glDrawPixels

Description

GL_COLOR_INDEX

Each pixel is a single value, a color index. It is converted to fixed-point format, with an unspecified number of bits to the right of the binary point, regardless of the memory data type. Floating-point values convert to true fixed-point values. Signed and unsigned integer data is converted with all fraction bits set to 0. Bitmap data convert to either 0 or 1.

Each fixed-point index is then shifted left by GL_INDEX_SHIFT bits and added to GL_INDEX_OFFSET . If GL_INDEX_SHIFT is negative, the shift is to the right. In either case, zero bits fill otherwise unspecified bit locations in the result.

If the GL is in RGBA mode, the resulting index is converted to an RGBA pixel with the help of the GL_PIXEL_MAP_I_TO_R , GL_PIXEL_MAP_I_TO_G , GL_PIXEL_MAP_I_TO_B , and GL_PIXEL_MAP_I_TO_A tables. If the GL is in color index mode, and if GL_MAP_COLOR is true, the index is replaced with the value that it references in lookup table GL_PIXEL_MAP_I_TO_I . Whether the lookup replacement of the index is done or not, the integer part of the index is then ANDed with $2^{\mathit{b}}-1$ , where $\mathit{b}$ is the number of bits in a color index buffer.

The GL then converts the resulting indices or RGBA colors to fragments by attaching the current raster position z coordinate and texture coordinates to each pixel, then assigning $\mathit{x}$ and $\mathit{y}$ window coordinates to the $\mathit{n}$ th fragment such that

${\mathit{x}}_{\mathit{n}}={\mathit{x}}_{\mathit{r}}+\mathit{n}\%\mathit{width}$

${\mathit{y}}_{\mathit{n}}={\mathit{y}}_{\mathit{r}}+\frac{\mathit{n}}{\mathit{width}}$

where $\left({\mathit{x}}_{\mathit{r}},{\mathit{y}}_{\mathit{r}}\right)$ is the current raster position. These pixel fragments are then treated just like the fragments generated by rasterizing points, lines, or polygons. Texture mapping, fog, and all the fragment operations are applied before the fragments are written to the frame buffer.

GL_STENCIL_INDEX

Each pixel is a single value, a stencil index. It is converted to fixed-point format, with an unspecified number of bits to the right of the binary point, regardless of the memory data type. Floating-point values convert to true fixed-point values. Signed and unsigned integer data is converted with all fraction bits set to 0. Bitmap data convert to either 0 or 1.

Each fixed-point index is then shifted left by GL_INDEX_SHIFT bits, and added to GL_INDEX_OFFSET . If GL_INDEX_SHIFT is negative, the shift is to the right. In either case, zero bits fill otherwise unspecified bit locations in the result. If GL_MAP_STENCIL is true, the index is replaced with the value that it references in lookup table GL_PIXEL_MAP_S_TO_S . Whether the lookup replacement of the index is done or not, the integer part of the index is then ANDed with $2^{\mathit{b}}-1$ , where $\mathit{b}$ is the number of bits in the stencil buffer. The resulting stencil indices are then written to the stencil buffer such that the $\mathit{n}$ th index is written to location

${\mathit{x}}_{\mathit{n}}={\mathit{x}}_{\mathit{r}}+\mathit{n}\%\mathit{width}$

${\mathit{y}}_{\mathit{n}}={\mathit{y}}_{\mathit{r}}+\frac{\mathit{n}}{\mathit{width}}$

where $\left({\mathit{x}}_{\mathit{r}},{\mathit{y}}_{\mathit{r}}\right)$ is the current raster position. Only the pixel ownership test, the scissor test, and the stencil writemask affect these write operations.

GL_DEPTH_COMPONENT

Each pixel is a single-depth component. Floating-point data is converted directly to an internal floating-point format with unspecified precision. Signed integer data is mapped linearly to the internal floating-point format such that the most positive representable integer value maps to 1.0, and the most negative representable value maps to $-1.0$ . Unsigned integer data is mapped similarly: the largest integer value maps to 1.0, and 0 maps to 0.0. The resulting floating-point depth value is then multiplied by GL_DEPTH_SCALE and added to GL_DEPTH_BIAS . The result is clamped to the range $\left[0,1\right]$ .

The GL then converts the resulting depth components to fragments by attaching the current raster position color or color index and texture coordinates to each pixel, then assigning $\mathit{x}$ and $\mathit{y}$ window coordinates to the $\mathit{n}$ th fragment such that

${\mathit{x}}_{\mathit{n}}={\mathit{x}}_{\mathit{r}}+\mathit{n}\%\mathit{width}$

${\mathit{y}}_{\mathit{n}}={\mathit{y}}_{\mathit{r}}+\frac{\mathit{n}}{\mathit{width}}$

where $\left({\mathit{x}}_{\mathit{r}},{\mathit{y}}_{\mathit{r}}\right)$ is the current raster position. These pixel fragments are then treated just like the fragments generated by rasterizing points, lines, or polygons. Texture mapping, fog, and all the fragment operations are applied before the fragments are written to the frame buffer.

GL_RGBA

GL_BGRA

Each pixel is a four-component group: For GL_RGBA , the red component is first, followed by green, followed by blue, followed by alpha; for GL_BGRA the order is blue, green, red and then alpha. Floating-point values are converted directly to an internal floating-point format with unspecified precision. Signed integer values are mapped linearly to the internal floating-point format such that the most positive representable integer value maps to 1.0, and the most negative representable value maps to $-1.0$ . (Note that this mapping does not convert 0 precisely to 0.0.) Unsigned integer data is mapped similarly: The largest integer value maps to 1.0, and 0 maps to 0.0. The resulting floating-point color values are then multiplied by GL_c_SCALE and added to GL_c_BIAS , where c is RED, GREEN, BLUE, and ALPHA for the respective color components. The results are clamped to the range $\left[0,1\right]$ .

If GL_MAP_COLOR is true, each color component is scaled by the size of lookup table GL_PIXEL_MAP_c_TO_c , then replaced by the value that it references in that table. c is R, G, B, or A respectively.

The GL then converts the resulting RGBA colors to fragments by attaching the current raster position z coordinate and texture coordinates to each pixel, then assigning $\mathit{x}$ and $\mathit{y}$ window coordinates to the $\mathit{n}$ th fragment such that

${\mathit{x}}_{\mathit{n}}={\mathit{x}}_{\mathit{r}}+\mathit{n}\%\mathit{width}$

${\mathit{y}}_{\mathit{n}}={\mathit{y}}_{\mathit{r}}+\frac{\mathit{n}}{\mathit{width}}$

where $\left({\mathit{x}}_{\mathit{r}},{\mathit{y}}_{\mathit{r}}\right)$ is the current raster position. These pixel fragments are then treated just like the fragments generated by rasterizing points, lines, or polygons. Texture mapping, fog, and all the fragment operations are applied before the fragments are written to the frame buffer.

GL_RED

Each pixel is a single red component. This component is converted to the internal floating-point format in the same way the red component of an RGBA pixel is. It is then converted to an RGBA pixel with green and blue set to 0, and alpha set to 1. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_GREEN

Each pixel is a single green component. This component is converted to the internal floating-point format in the same way the green component of an RGBA pixel is. It is then converted to an RGBA pixel with red and blue set to 0, and alpha set to 1. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_BLUE

Each pixel is a single blue component. This component is converted to the internal floating-point format in the same way the blue component of an RGBA pixel is. It is then converted to an RGBA pixel with red and green set to 0, and alpha set to 1. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_ALPHA

Each pixel is a single alpha component. This component is converted to the internal floating-point format in the same way the alpha component of an RGBA pixel is. It is then converted to an RGBA pixel with red, green, and blue set to 0. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_RGB

GL_BGR

Each pixel is a three-component group: red first, followed by green, followed by blue; for GL_BGR , the first component is blue, followed by green and then red. Each component is converted to the internal floating-point format in the same way the red, green, and blue components of an RGBA pixel are. The color triple is converted to an RGBA pixel with alpha set to 1. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_LUMINANCE

Each pixel is a single luminance component. This component is converted to the internal floating-point format in the same way the red component of an RGBA pixel is. It is then converted to an RGBA pixel with red, green, and blue set to the converted luminance value, and alpha set to 1. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

GL_LUMINANCE_ALPHA

Each pixel is a two-component group: luminance first, followed by alpha. The two components are converted to the internal floating-point format in the same way the red component of an RGBA pixel is. They are then converted to an RGBA pixel with red, green, and blue set to the converted luminance value, and alpha set to the converted alpha value. After this conversion, the pixel is treated as if it had been read as an RGBA pixel.

Notes

Errors

Associated Gets

See Also

Copyright